[gmx-users] overheating problem
ahmet yıldırım
ahmedo047 at gmail.com
Tue Feb 7 09:45:05 CET 2012
Hi,
I put a new cooler (Thermaltake Friock) on the CPU. The problem is solved.
2012/2/4 Mark Abraham <Mark.Abraham at anu.edu.au>
> On 4/02/2012 11:15 PM, ahmet yıldırım wrote:
>
> Hi,
> The problem might caused by X58 chipset.
> Now I am using ubuntu. Which operating system do you recommend?
>
>
> I doubt it is relevant at all.
>
> Mark
>
>
> 2012/2/4 David van der Spoel <spoel at xray.bmc.uu.se>
>
>> On 2012-02-03 23:49, ahmet yıldırım wrote:
>>
>>> Dear Mark,
>>>
>>>
>>> Believe me, I tried all methods that you said but unfortunately the
>>> result doesnt change :(
>>>
>>
>> It used to be like this that GROMACS ran more efficient on AMD cpus than
>> the official AMD burn-in code, and therefore also hotter. You could run
>> gromacs on fewer cores to see if that helps, but it seems like a hardware
>> problem. Have any warranty on your computers?
>>
>>
>>> 2012/2/4 Mark Abraham <Mark.Abraham at anu.edu.au
>>> <mailto:Mark.Abraham at anu.edu.au>>
>>>
>>>
>>> On 4/02/2012 8:24 AM, ahmet yıldırım wrote:
>>>
>>>> Dear users,
>>>>
>>>> I am using ubuntu 11.1 (64 bit). The Ubuntu normally runs when I
>>>> dont run the Gromacs program. i.e there is not heating problem.
>>>> But the CPU is excessive heating (82 degree) when I run the gromacs.
>>>>
>>>
>>> There are various "stress test" programs you can get if you Google
>>> around. I expect these will produce the same symptoms.
>>>
>>>
>>> I am using the all cores at 100%. Now I have 2 PC.I use them
>>>>
>>>> separately
>>>> 1.first: It has Intel i7 920 CPU and Asus P6T SE motherboard
>>>> 2.second: It has Intel I7 960 and Gıgabyte x58A-UD5 LGA 1366
>>>> motherboard
>>>> I have the problem of warming/overheating on both computers. I
>>>> could not figure out this problem for two weeks :(
>>>> By the way:
>>>> -I dont use an older compiler to get the binary. I am using gcc
>>>> 4.6 and I am using Gromacs 4.5.4
>>>> -I watch the temperatures by "lm sensor" program
>>>> -I installed ubuntu 32-bit but the result didnt change again
>>>> -I have sufficient cooling on both PC
>>>>
>>>
>>> I'd say this is evidence that you don't have sufficient cooling.
>>>
>>>
>>> It is likely something related to the program because no problem
>>>> with any hardware related to computers according to experts say.
>>>>
>>>
>>> If things are installed correctly. For example, cheap thermal paste
>>> between the CPU and heat sink can cause these symptoms.
>>>
>>>
>>>
>>>> what do you suggest? :(
>>>>
>>>
>>> Get more cooling. Maybe lower the clock speed (if possible). Run a
>>> less efficient MD code!
>>>
>>> Mark
>>>
>>>
>>>
>>>> *atk0110-acpi-0
>>>>
>>>> Adapter: ACPI interface
>>>> Vcore Voltage: +1.22 V (min = +0.80 V, max = +1.60 V)
>>>> +3.3 Voltage: +3.31 V (min = +2.97 V, max = +3.63 V)
>>>> +5 Voltage: +5.00 V (min = +4.50 V, max = +5.50 V)
>>>> +12 Voltage: +12.03 V (min = +10.20 V, max = +13.80 V)
>>>> CPU FAN Speed: 2163 RPM (min = 600 RPM)
>>>> CHASSIS1 FAN Speed: 0 RPM (min = 600 RPM)
>>>> CHASSIS2 FAN Speed: 2033 RPM (min = 600 RPM)
>>>> POWER FAN Speed: 0 RPM (min = 0 RPM)
>>>> CPU Temperature: +82.0°C (high = +60.0°C, crit = +75.0°C)
>>>> MB Temperature: +45.0°C (high = +45.0°C, crit = +75.0°C)
>>>>
>>>> radeon-pci-0200
>>>> Adapter: PCI adapter
>>>> temp1: +60.5°C *
>>>>
>>>>
>>>> --
>>>> Ahmet Yıldırım
>>>>
>>>>
>>>>
>>>>
>>>
>>> --
>>> gmx-users mailing list gmx-users at gromacs.org
>>> <mailto:gmx-users at gromacs.org>
>>>
>>> http://lists.gromacs.org/mailman/listinfo/gmx-users
>>> Please search the archive at
>>> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
>>> Please don't post (un)subscribe requests to the list. Use the
>>> www interface or send it to gmx-users-request at gromacs.org
>>> <mailto:gmx-users-request at gromacs.org>.
>>>
>>> Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>>>
>>>
>>>
>>>
>>> --
>>> Ahmet Yıldırım
>>>
>>>
>>>
>>>
>>
>> --
>> David van der Spoel, Ph.D., Professor of Biology
>> Dept. of Cell & Molec. Biol., Uppsala University.
>> Box 596, 75124 Uppsala, Sweden. Phone: +46184714205.
>> spoel at xray.bmc.uu.se http://folding.bmc.uu.se
>>
>> --
>> gmx-users mailing list gmx-users at gromacs.org
>> http://lists.gromacs.org/mailman/listinfo/gmx-users
>> Please search the archive at
>> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
>> Please don't post (un)subscribe requests to the list. Use the www
>> interface or send it to gmx-users-request at gromacs.org.
>> Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>>
>
>
>
> --
> Ahmet Yıldırım
>
>
>
>
>
> --
> gmx-users mailing list gmx-users at gromacs.org
> http://lists.gromacs.org/mailman/listinfo/gmx-users
> Please search the archive at
> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> Please don't post (un)subscribe requests to the list. Use the
> www interface or send it to gmx-users-request at gromacs.org.
> Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>
--
Ahmet Yıldırım
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://maillist.sys.kth.se/pipermail/gromacs.org_gmx-users/attachments/20120207/3e318717/attachment.html>
More information about the gromacs.org_gmx-users
mailing list