[gmx-users] Interaction study for peptide-receptor..
rama david
ramadavidgroup at gmail.com
Thu Oct 4 15:16:26 CEST 2012
Thank you for reply,
I read the recently published article in Biochemistry.
They worked on the same receptor that I am working.
( as I mention in my previous mail)
They used NAMD software and I am using gromacs.
They sliced the receptor binding site and used the the solid support
to the binding site and did simulation.
So if I freeze the group is it will ok ??
Is it possible in gromacs to fix the residue on solid immobilized surface.
If it is how to do it??
my question is How to decide which group are remove and which group should
keep in simulation.????
thank you in advance
Thank you for giving your valuable time and advice to me.
With best wishes and regards,
Rama david
On Thu, Oct 4, 2012 at 6:11 PM, Thomas Evangelidis <tevang3 at gmail.com>wrote:
> I don't think AutoDock and Vina are suitable for peptide docking. I would
> first try the FlexPepDocking module of Rosetta which does ab initio folding
> of the peptide on the receptor, while moving the side-chains of the protein
> but leaves its backbone intact. Rosetta implements a knowledge-based
> scoring, which has been specifically designed for this task and is as fast
> as Vina or AutoDock.
>
> I would first do that and if I wouldn't get any reasonable results then I
> would move to MD starting from the top scored protein-peptide complexes
> created by Rosetta.
>
> Thomas
>
>
> On 4 October 2012 15:08, rama david <ramadavidgroup at gmail.com> wrote:
>
> > Hi francesco,
> >
> > Thank you For reply.
> > I did docking but the result are not so impressive.
> > I used vina and autodock.
> > I also did virtual screening in autodock but the result are not upto the
> > mark.
> >
> > Is the freezing of group can affect my system?? How much efficiency I get
> > by these work??
> > As these group are going to freeze in four simulation so if it affect one
> > ligand it affect other
> > ligand also.
> >
> > I read article that did the work like me ,
> > they sliced the binding residues and used the inert solid sphere to
> > support binding residues
> > instead of the freezing group other group.
> >
> > I think both way should have same effect..Am I right or wrong??
> >
> > If you have any other way please suggest it..
> >
> > With best wishes and regards
> > Rama david
> >
> >
> > On Thu, Oct 4, 2012 at 5:07 PM, francesco oteri
> > <francesco.oteri at gmail.com>wrote:
> >
> > > Hi,
> > > as far as I know, freezing just set velocities to 0 so you gain nothing
> > > freezing atoms.
> > >
> > > By the way, have you tried docking? It takes into account multiple
> > > conformation and
> > > orientation of the peptide and, depending upon the implemented
> algorithm,
> > > also
> > > protein sidechain orientation.
> > >
> > > Francesco
> > >
> > >
> > > 2012/10/4 rama david <ramadavidgroup at gmail.com>
> > >
> > > > thank you Justin for reply.
> > > >
> > > > I dont know about long range interactions.
> > > > But as I freeze the group I think it will improve my computational
> > speed.
> > > > So is there any way to find out or decide which group should be
> > > > freeze, and which group should affect my interaction most probably??
> > > >
> > > > Should I do Essential Dynamics ??? or Principle component analysis
> ???
> > > >
> > > > Would you suggest me any general protocol for such work??
> > > >
> > > > Thank you in Advance
> > > >
> > > >
> > > > With Best Wishes and regards.
> > > > Rama David
> > > >
> > > > On Thu, Oct 4, 2012 at 3:57 PM, Justin Lemkul <jalemkul at vt.edu>
> wrote:
> > > >
> > > > >
> > > > >
> > > > > On 10/4/12 2:01 AM, rama david wrote:
> > > > >
> > > > >> Hi gromacs Friends,
> > > > >> I want to do peptide-receptor ( Protein) interaction
> > > > >> study.Receptor consist a single chain.
> > > > >> Peptide is made up of 4 amino acids. I know the interaction
> > pattern
> > > of
> > > > >> peptide and receptor.
> > > > >> I plan to mutate single residue each at a time and run 4
> > simulation .
> > > > >> So I will have the 4 different simulation that contain the mutated
> > > > >> residues
> > > > >> and the wild one.
> > > > >>
> > > > >>
> > > > >> Then afterward from the interaction energy I want to select the
> > > peptide
> > > > >> which is showing
> > > > >> stronger interaction than others.
> > > > >>
> > > > >> As mention I know the binding site, If I freeze the remaining
> > portion
> > > > in
> > > > >> receptor
> > > > >> that not involved in binding , Is it going to affect my screening
> > > > process
> > > > >> ???
> > > > >>
> > > > >>
> > > > > Potentially. Do you know that the binding interactions and the
> > > mutations
> > > > > will only perturb local residues? Do you know that there are no
> > > > long-range
> > > > > motions to be considered?
> > > > >
> > > > > I think you gain very little by freezing portions of the system,
> and
> > > risk
> > > > > more than you gain.
> > > > >
> > > > > -Justin
> > > > >
> > > > > --
> > > > > ==============================**==========
> > > > >
> > > > > Justin A. Lemkul, Ph.D.
> > > > > Research Scientist
> > > > > Department of Biochemistry
> > > > > Virginia Tech
> > > > > Blacksburg, VA
> > > > > jalemkul[at]vt.edu | (540) 231-9080
> > > > > http://www.bevanlab.biochem.**vt.edu/Pages/Personal/justin<
> > > > http://www.bevanlab.biochem.vt.edu/Pages/Personal/justin>
> > > > >
> > > > > ==============================**==========
> > > > > --
> > > > > gmx-users mailing list gmx-users at gromacs.org
> > > > > http://lists.gromacs.org/**mailman/listinfo/gmx-users<
> > > > http://lists.gromacs.org/mailman/listinfo/gmx-users>
> > > > > * Please search the archive at http://www.gromacs.org/**
> > > > > Support/Mailing_Lists/Search<
> > > > http://www.gromacs.org/Support/Mailing_Lists/Search>before posting!
> > > > > * Please don't post (un)subscribe requests to the list. Use the www
> > > > > interface or send it to gmx-users-request at gromacs.org.
> > > > > * Can't post? Read http://www.gromacs.org/**Support/Mailing_Lists<
> > > > http://www.gromacs.org/Support/Mailing_Lists>
> > > > >
> > > > --
> > > > gmx-users mailing list gmx-users at gromacs.org
> > > > http://lists.gromacs.org/mailman/listinfo/gmx-users
> > > > * Please search the archive at
> > > > http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> > > > * Please don't post (un)subscribe requests to the list. Use the
> > > > www interface or send it to gmx-users-request at gromacs.org.
> > > > * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
> > > >
> > >
> > >
> > >
> > > --
> > > Cordiali saluti, Dr.Oteri Francesco
> > > --
> > > gmx-users mailing list gmx-users at gromacs.org
> > > http://lists.gromacs.org/mailman/listinfo/gmx-users
> > > * Please search the archive at
> > > http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> > > * Please don't post (un)subscribe requests to the list. Use the
> > > www interface or send it to gmx-users-request at gromacs.org.
> > > * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
> > >
> > --
> > gmx-users mailing list gmx-users at gromacs.org
> > http://lists.gromacs.org/mailman/listinfo/gmx-users
> > * Please search the archive at
> > http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> > * Please don't post (un)subscribe requests to the list. Use the
> > www interface or send it to gmx-users-request at gromacs.org.
> > * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
> >
>
>
>
> --
>
> ======================================================================
>
> Thomas Evangelidis
>
> PhD student
> University of Athens
> Faculty of Pharmacy
> Department of Pharmaceutical Chemistry
> Panepistimioupoli-Zografou
> 157 71 Athens
> GREECE
>
> email: tevang at pharm.uoa.gr
>
> tevang3 at gmail.com
>
>
> website: https://sites.google.com/site/thomasevangelidishomepage/
> --
> gmx-users mailing list gmx-users at gromacs.org
> http://lists.gromacs.org/mailman/listinfo/gmx-users
> * Please search the archive at
> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> * Please don't post (un)subscribe requests to the list. Use the
> www interface or send it to gmx-users-request at gromacs.org.
> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>
More information about the gromacs.org_gmx-users
mailing list