[gmx-users] problems with the output of pullx
Mark Abraham
mark.j.abraham at gmail.com
Sat Feb 24 18:58:02 CET 2018
Hi,
My (thoroughly uneducated) guess is that the spikes are related to the pull
distance approaching half of the dimensions of the cell. Not all flavours
of pulling can handle this. Might that be the issue?
Mark
On Sat, Feb 24, 2018, 17:55 alfredo <alfredo at ices.utexas.edu> wrote:
> Hi,
> Updating my post. The problem has been observed in two different machine
> systems (the latest I have found the problem was the skylake nodes in
> tacc). I assumed it has to be some communication bug of coordinates and
> forces in the pull part of the code. Probably observed in my case
> because of the large size of the peptide I am pulling inside the
> membrane. For now I am thinking to extract coordinates from the trr file
> and from them compute the pulling harmonic forces. But not an ideal
> solution.
> Thanks
> Alfredo
>
>
>
>
> On 2018-02-22 10:17, Alfredo E. Cardenas wrote:
> > Hi,
> > I am using gromacs to get the PMF of a peptide of about 20 amino
> > acids, moving inside of a bilayer membrane. After pulling the peptide
> > inside the membrane now I am using pull-coord1-type = umbrella
> > and pull-coord1-geometry = distance to sample configurations in each
> > window for the umbrella simulations along the z axis (axis
> > perpendicular to the membrane surface). Runs finish ok, no error
> > messages. The problem is that when I looked at the contents of the
> > pullx file I observed spikes (up to 5 or more Angstroms) in the z
> > coordinate separating the center of mass of the peptide from the
> > membrane center. But when I extract the z coordinates of the center of
> > mass of the two groups and compute the difference the values look
> > reasonable with no spikes.
> >
> > Here an example (it starts good):
> > time (ps) from pullx from traj analysis
> >
> > 200000.000 0.475923002 0.475919992
> > 200010.000 0.498394012 0.498389989
> > 200020.000 0.527589977 0.527589977
> > 200030.000 0.491834015 0.493739992
> > 200040.000 0.485377997 0.485379994
> > 200050.000 0.488474995 0.488469988
> > 200060.000 0.507991016 0.507990003
> > 200070.000 0.475095987 0.475100011
> > 200080.000 0.465889990 0.465889990
> > 200090.000 0.515878975 0.515879989
> > 200100.000 0.501435995 0.501429975
> > 200110.000 0.505191982 0.505190015
> >
> > Here a bad section:
> >
> > 214000.000 0.427343011 0.601450026
> > 214010.000 0.484564990 0.545799971
> > 214020.000 0.530139029 0.603110015
> > 214030.000 0.176231995 0.650319993
> > 214040.000 0.342045009 0.637109995
> > 214050.000 0.181202993 0.636659980
> > 214060.000 0.338808000 0.595300019
> > 214070.000 0.442301005 0.547529995
> > 214080.000 0.396046013 0.565050006
> > 214090.000 0.431407988 0.538460016
> > 214100.000 0.402586013 0.568250000
> > 214110.000 0.438223004 0.575810015
> >
> > Then good again:
> >
> > 230000.000 0.477869004 0.477869987
> > 230010.000 0.511840999 0.511839986
> > 230020.000 0.469146013 0.469150007
> > 230030.000 0.480194002 0.480190009
> > 230040.000 0.525618017 0.525619984
> > 230050.000 0.498955995 0.498950005
> > 230060.000 0.489230990 0.489230007
> > 230070.000 0.531931996 0.531930029
> > 230080.000 0.535376012 0.535380006
> > 230090.000 0.488822013 0.488830000
> > 230100.000 0.510704994 0.510699987
> > 230110.000 0.524537981 0.524540007
> > 230120.000 0.513199985 0.513189971
> >
> > This problem happens in most umbrella windows that I have examined,
> > sometimes several times during the long trajectories I am running. The
> > pullf output also have those spikes.
> >
> > Here is the mdp file I am using:
> >
> > integrator = md
> > dt = 0.002
> > nsteps = 50000000
> > nstlog = 10000
> > nstxout = 5000
> > nstvout = 5000
> > nstfout = 5000
> > nstcalcenergy = 500
> > nstenergy = 500
> > ;
> > cutoff-scheme = Verlet
> > nstlist = 20
> > rlist = 1.2
> > coulombtype = pme
> > rcoulomb = 1.2
> > vdwtype = Cut-off
> > vdw-modifier = Force-switch
> > rvdw_switch = 1.0
> > rvdw = 1.2
> > ;
> > tcoupl = Nose-Hoover
> > tc_grps = PROT MEMB SOL_ION
> > tau_t = 1.0 1.0 1.0
> > ref_t = 303.15 303.15 303.15
> > ;
> > pcoupl = Parrinello-Rahman
> > pcoupltype = semiisotropic
> > tau_p = 5.0
> > compressibility = 4.5e-5 4.5e-5
> > ref_p = 1.0 1.0
> > ;
> > constraints = h-bonds
> > constraint_algorithm = LINCS
> > continuation = yes
> > ;
> > nstcomm = 500
> > comm_mode = linear
> > comm_grps = PROT_MEMB SOL_ION
> > ;
> > refcoord_scaling = com
> > ;
> > pull = yes
> > pull-coord1-type = umbrella
> > pull-coord1-geometry = distance
> > pull-coord1-dim = N N Y
> > pull-ngroups = 2
> > pull-ncoords = 1
> > pull-coord1-groups = 1 2
> > pull-group1-name = MEMB
> > pull-group2-name = PROT
> > pull-coord1-init = 0.400
> > pull-coord1-k = 1000 ; kJ mol^-1 nm^-2
> > pull-nstxout = 500 ; every 1 ps
> > pull-nstfout = 500 ; every 1 ps
> >
> >
> > I am not sure what is wrong here. It seems a bug to me.
> >
> >
> > Here is the header of the log file:
> >
> > Log file opened on Thu Feb 15 11:09:05 2018
> > Host: sb202 pid: 254782 rank ID: 0 number of ranks: 112
> > :-) GROMACS - mdrun_mpi, 2016.4 (-:
> >
> >
> >
> > GROMACS: mdrun_mpi, version 2016.4
> >
> >
> > Command line:
> > mdrun_mpi -v -cpi state8.2.cpt -deffnm constraint8.3 -cpo
> > state8.3.cpt -noappend
> >
> > GROMACS version: 2016.4
> > Precision: single
> > Memory model: 64 bit
> > MPI library: MPI
> > OpenMP support: enabled (GMX_OPENMP_MAX_THREADS = 32)
> > GPU support: disabled
> > SIMD instructions: AVX_256
> > FFT library: fftw-3.3.3-sse2
> > RDTSCP usage: enabled
> > TNG support: enabled
> > Hwloc support: hwloc-1.11.0
> > Tracing support: disabled
> > Built on: Fri Jan 26 09:28:05 MST 2018
> > Built by: aecarde at skybridge-login11 [CMAKE]
> > Build OS/arch: Linux 3.10.0-514.26.1.1chaos.ch6_1.x86_64 x86_64
> > Build CPU vendor: Intel
> > Build CPU brand: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz
> > Build CPU family: 6 Model: 45 Stepping: 7
> > Build CPU features: aes apic avx clfsh cmov cx8 cx16 htt lahf mmx msr
> > nonstop_tsc pcid pclmuldq pdcm pdpe1gb popcnt pse rdtscp sse2 sse3
> > sse4.1 sse4.2 ssse3 tdt x2apic
> > C compiler: /opt/intel/16.0/bin/intel64/icc Intel
> > 16.0.2.20160204
> > C compiler flags: -mavx -std=gnu99 -O3 -DNDEBUG -ip
> > -funroll-all-loops -alias-const -ansi-alias
> > C++ compiler: /opt/intel/16.0/bin/intel64/icpc Intel
> > 16.0.2.20160204
> > C++ compiler flags: -mavx -std=c++0x -O3 -DNDEBUG -ip
> > -funroll-all-loops -alias-const -ansi-alias
> >
> >
> > Running on 7 nodes with total 112 cores, 112 logical cores
> > Cores per node: 16
> > Logical cores per node: 16
> >
> >
> > Thanks for any help
> >
> > Alfredo
> >
> >
> > Alfredo E. Cardenas, PhD
> > Institute of Computational Engineering and Sciences (ICES)
> > 1 University Station, C0200
> > University of Texas
> > Austin, TX 78712
> > Office: (512)232-5164
> > alfredo at ices.utexas.edu <mailto:alfredo at ices.utexas.edu>
>
> --
> Gromacs Users mailing list
>
> * Please search the archive at
> http://www.gromacs.org/Support/Mailing_Lists/GMX-Users_List before
> posting!
>
> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>
> * For (un)subscribe requests visit
> https://maillist.sys.kth.se/mailman/listinfo/gromacs.org_gmx-users or
> send a mail to gmx-users-request at gromacs.org.
>
More information about the gromacs.org_gmx-users
mailing list