[gmx-users] Simulating infinite polymer crystal structure

David Mobley dmobley at gmail.com
Thu Dec 29 18:56:10 CET 2005


Hi,

I don't have any experience with polymers, but these sorts of errors
often happen when forces get too large for some reason. Have you
minimized your system well initially? What timestep are you using? Are
you just running simple MD, and with what thermostat? Sometimes using
a smaller timestep can help.

David


On 12/29/05, Malin Bergenstråhle <malbe at kth.se> wrote:
> Hi all,
>
> I am trying to simulate a system consisting of 16 infinite polymer
> chains in a crystal structure.
> I have a lot of troubles with simulations crashing due to Lincs
> complaining about rotating bonds (see dump from a typical logfile below).
>
> My system is organized with the 16 chains in 4 layers with 4 chains
> each. The two central layers are position restrained to act bulk and the
> outer 8 chains are allowed to move.
> I have not been able to figure out what causes the crashes but it seems
> as if two atoms get very close to eachother and then suddenly one of
> them start rotating. I wonder if anybody has experience from simulating
> infinite crystal polymer structures before? The polymer I am using is
> cellulose with 2 cellobiose units per chain.
>
> One specific thing that I wonder if it could cause such problems is that
> my system is not relaxed, the 2 central layers are fixed in the
> experimental crystal structure. Although, when I try simulating one
> chain it works fine and also sometimes with the whole system it works,
> it is just very very unreliable and when it starts crashing it is
> difficult to get it stable again.
>
>
> Any comments would be nice.
> Thanks,
>
> Malin
>
>
> Step 47430, time 47.43 (ps)  LINCS WARNING
> relative constraint deviation after LINCS:
> max 0.028302 (between atoms 5 and 6) rms 0.000658
> bonds that rotated more than 30 degrees:
>  atom 1 atom 2  angle  previous, current, constraint length
>       4      5   46.2    0.1435   0.1424      0.1435
>       5      6   67.2    0.1000   0.1028      0.1000
>      81     82   47.6    0.1000   0.1012      0.1000
>
> Step 47431, time 47.431 (ps)  LINCS WARNING
> relative constraint deviation after LINCS:
> max 0.076858 (between atoms 5 and 6) rms 0.001591
> bonds that rotated more than 30 degrees:
>  atom 1 atom 2  angle  previous, current, constraint length
>       4      5   35.6    0.1424   0.1424      0.1435
>       5      6   94.5    0.1028   0.1077      0.1000
>      81     82   45.8    0.1012   0.1001      0.1000
>
> Step 47432, time 47.432 (ps)  LINCS WARNING
> relative constraint deviation after LINCS:
> max 12.802402 (between atoms 4 and 5) rms 0.411134
> bonds that rotated more than 30 degrees:
>  atom 1 atom 2  angle  previous, current, constraint length
>       1      2   94.6    0.1435   0.2582      0.1435
>       1      7   36.8    0.1520   0.1925      0.1520
>      56      1   48.5    0.1435   0.2066      0.1435
>       2      3  100.5    0.1435   0.6530      0.1435
>       3      4  102.7    0.1519   0.5980      0.1520
>       3     13   98.9    0.1520   0.7495      0.1520
>       4      5   94.6    0.1424   1.9806      0.1435
>       5      6   96.0    0.1077   0.9881      0.1000
>       7     10   52.7    0.1520   0.2386      0.1520
>      10     11   55.6    0.1435   0.2351      0.1435
>      10     13   95.9    0.1520   1.0668      0.1520
>      13     14  100.1    0.1435   0.6664      0.1435
>      14     15   94.4    0.1435   1.2567      0.1435
>      15     16  105.2    0.1435   0.4742      0.1435
>      15     21  100.7    0.1520   0.3847      0.1520
>      16     17   73.0    0.1435   0.2353      0.1435
>      17     18   31.8    0.1520   0.1793      0.1520
>      21     22   73.8    0.1435   0.2583      0.1435
>      21     24   67.5    0.1520   0.2454      0.1520
>      22     23   54.5    0.1000   0.1558      0.1000
>      24     25   31.7    0.1435   0.1708      0.1435
>      81     82   42.0    0.1001   0.0990      0.1000
> Constraint error in algorithm Lincs at step 47432
> Wrote pdb files with previous and current coordinates
>
> Step 47433, time 47.433 (ps)  LINCS WARNING
> relative constraint deviation after LINCS:
> max 134.873215 (between atoms 21 and 22) rms 6.610656
> bonds that rotated more than 30 degrees:
>  atom 1 atom 2  angle  previous, current, constraint length
>       1      2  113.0    0.2582   0.7208      0.1435
>       1      7  103.7    0.1925   4.1936      0.1520
>      56      1  120.7    0.2066   0.6874      0.1435
>       2      3  150.9    0.6530   0.9020      0.1435
>       3      4  102.2    0.5980   3.6322      0.1520
>       3     13   56.7    0.7495   1.9560      0.1520
>       4      5   88.7    1.9806   5.8247      0.1435
>       5      6   95.7    0.9881   0.5766      0.1000
>       7      8   81.8    0.1581   3.7805      0.1435
>       7     10  104.3    0.2386   3.2932      0.1520
>       8      9  129.8    0.1026   0.4876      0.1000
>      10     11  106.4    0.2351   1.2224      0.1435
>      10     13   85.0    1.0668   0.9720      0.1520
>      11     12   93.3    0.1030   0.0923      0.1000
>      13     14   87.2    0.6664   4.4932      0.1435
>      14     15   71.9    1.2567   4.8085      0.1435
>      15     16   57.0    0.4742   3.4035      0.1435
>      15     21   91.6    0.3847  17.6591      0.1520
>      16     17  105.4    0.2353  18.8067      0.1435
>      17     18   90.5    0.1793  15.4891      0.1520
>      17     27  163.1    0.1688   4.7973      0.1520
>      18     19  128.8    0.1473   3.0623      0.1435
>      19     20  131.1    0.1004   1.4866      0.1000
>      21     22   59.0    0.2583  19.4978      0.1435
>      21     24   75.0    0.2454  18.2038      0.1520
>      22     23   69.8    0.1558   3.1969      0.1000
>      24     27   95.0    0.1705  18.0591      0.1520
>      25     26   95.1    0.1043   2.0528      0.1000
>      27     28   92.3    0.1504  11.2440      0.1435
>      28     29   56.5    0.1455   3.3040      0.1435
>      29     30   66.7    0.1439   1.4205      0.1435
>      29     35  115.3    0.1525   1.5023      0.1520
>      30     31  115.1    0.1435   0.0240      0.1435
>      31     41   39.6    0.1520   0.1845      0.1520
>      35     36  123.8    0.1436   0.2553      0.1435
>      35     38  125.4    0.1521   0.2678      0.1520
>      36     37   58.7    0.1000   0.1677      0.1000
>      38     39   44.9    0.1435   0.2033      0.1435
>      38     41   45.8    0.1520   0.2244      0.1520
>      44     45   49.6    0.1440   0.2112      0.1435
>      45     46   52.2    0.1525   0.2301      0.1520
>      45     55   92.2    0.1542   0.3725      0.1520
>      49     52   53.2    0.1524   0.2378      0.1520
>      52     53   54.4    0.1438   0.2240      0.1435
>      52     55   92.5    0.1538   0.3668      0.1520
>      55     56   85.8    0.1497   0.3253      0.1435
>      81     82   33.7    0.0990   0.0994      0.1000
> Constraint error in algorithm Lincs at step 47433
> Wrote pdb files with previous and current coordinates
> _______________________________________________
> gmx-users mailing list
> gmx-users at gromacs.org
> http://www.gromacs.org/mailman/listinfo/gmx-users
> Please don't post (un)subscribe requests to the list. Use the
> www interface or send it to gmx-users-request at gromacs.org.
>



More information about the gromacs.org_gmx-users mailing list