[gmx-users] Water molecule near protein surface cannot be settled.
Dawid das
addiw7 at googlemail.com
Mon Aug 11 14:43:19 CEST 2014
That's what happens next:
step -1: Water molecule starting at atom 16281 can not be settled.
Check for bad contacts and/or reduce the timestep if appropriate.
step -1: Water molecule starting at atom 27936 can not be settled.
Check for bad contacts and/or reduce the timestep if appropriate.
Wrote pdb files with previous and current coordinates
Wrote pdb files with previous and current coordinates
step -1: Water molecule starting at atom 4074 can not be settled.
Check for bad contacts and/or reduce the timestep if appropriate.
Back Off! I just backed up step-1b_n0.pdb to ./#step-1b_n0.pdb.1#
Back Off! I just backed up step-1c_n0.pdb to ./#step-1c_n0.pdb.1#
Wrote pdb files with previous and current coordinates
Step 42, Epot=-4.159425e+05, Fnorm=5.172e+02, Fmax=2.777e+04 (atom 1726)
step -1: Water molecule starting at atom 16281 can not be settled.
Check for bad contacts and/or reduce the timestep if appropriate.
step -1: Water molecule starting at atom 31338 can not be settled.
Check for bad contacts and/or reduce the timestep if appropriate.
Back Off! I just backed up step-1b_n1.pdb to ./#step-1b_n1.pdb.1#
Back Off! I just backed up step-1b_n0.pdb to ./#step-1b_n0.pdb.2#
Back Off! I just backed up step-1c_n0.pdb to ./#step-1c_n0.pdb.2#
Back Off! I just backed up step-1c_n1.pdb to ./#step-1c_n1.pdb.1#
Wrote pdb files with previous and current coordinates
Wrote pdb files with previous and current coordinates
mpiexec: process_obit_event: evt 4 task 0 on wn656 stat 267.
mpiexec: wait_tasks: waiting for wn656.
mpiexec: kill_others_now: alarm went off, killing all other tasks.
mpiexec: kill_tasks: killing all tasks.
mpiexec: process_kill_event: evt 6 task 1 on wn656.
mpiexec: process_obit_event: evt 5 task 1 on wn656 stat 265.
mpiexec: Warning: task 0 died with signal 11 (Segmentation fault).
mpiexec: Warning: task 1 died with signal 9 (Killed).
And that's what's happening for steepest descent algorithm:
Step= 14, Dmax= 1.1e-01 nm, Epot= -3.85410e+05 Fmax= 2.96998e+05, atom=
1726
Step= 15, Dmax= 1.3e-01 nm, Epot= -3.86977e+05 Fmax= 6.09612e+04, atom=
1726
step 16: Water molecule starting at atom 3774 can not be settled.
Check for bad contacts and/or reduce the timestep if appropriate.
Wrote pdb files with previous and current coordinates
Step= 16, Dmax= 1.5e-01 nm, Epot= -1.61388e+23 Fmax= inf, atom=
1326
Step= 17, Dmax= 1.8e-01 nm, Epot= -3.93744e+05 Fmax= 2.75780e+04, atom=
1728^MStep= 18, Dmax= 9.2e-02 nm, Epot= -3.93744e+05 Fmax= 2.75780e+04,
atom= 1728^MStep= 19, Dmax= 4.6e-02 nm, Epot= -3.93744e+05 Fmax=
2.75780e+04, atom= 1728^MStep= 20, Dmax= 2.3e-02 nm, Epot= -3.93744e+05
Fmax= 2.75780e+04, atom= 1728^MStep= 21, Dmax= 1.2e-02 nm, Epot=
-3.93744e+05 Fmax= 2.75780e+04, atom= 1728^MStep= 22, Dmax= 5.8e-03 nm,
Epot= -3.93744e+05 Fmax= 2.75780e+04, atom= 1728^MStep= 23, Dmax= 2.9e-03
nm, Epot= -3.93744e+05 Fmax= 2.75780e+04, atom= 1728^MStep= 24, Dmax=
1.4e-03 nm, Epot= -3.93744e+05 Fmax= 2.75780e+04, atom= 1728^MStep= 25,
Dmax= 7.2e-04 nm, Epot= -3.93744e+05 Fmax= 2.75780e+04, atom= 1728^MStep=
26, Dmax= 3.6e-04 nm, Epot= -3.93744e+05 Fmax= 2.75780e+04, atom=
1728^MStep= 27, Dmax= 1.8e-04 nm, Epot= -3.93744e+05 Fmax= 2.75780e+04,
atom= 1728^MStep= 28, Dmax= 9.0e-05 nm, Epot= -3.93744e+05 Fmax=
2.75780e+04, atom= 1728^MStep= 29, Dmax= 4.5e-05 nm, Epot= -3.93744e+05
Fmax= 2.75780e+04, atom= 1728^MStep= 30, Dmax= 2.3e-05 nm, Epot=
-3.93744e+05 Fmax= 2.75780e+04, atom= 1728^MStep= 31, Dmax= 1.1e-05 nm,
Epot= -3.93744e+05 Fmax= 2.75780e+04, atom= 1728^MStep= 32, Dmax= 5.6e-06
nm, Epot= -3.93744e+05 Fmax= 2.75780e+04, atom= 1728^MStep= 33, Dmax=
2.8e-06 nm, Epot= -3.93744e+05 Fmax= 2.75780e+04, atom= 1728^MStep= 34,
Dmax= 1.4e-06 nm, Epot= -3.93744e+05 Fmax= 2.75780e+04, atom= 1728^M
Stepsize too small, or no change in energy.
Converged to machine precision,
but not to the requested precision Fmax < 500
Double precision normally gives you higher accuracy.
You might need to increase your constraint accuracy, or turn
off constraints alltogether (set constraints = none in mdp file)
writing lowest energy coordinates.
Steepest Descents converged to machine precision in 35 steps,
but did not reach the requested Fmax < 500.
Potential Energy = -1.6138844e+23
Maximum force = inf on atom 1326
Norm of force = inf
gcq#252: "It's Coming Right For Us !" (South Park)
mpiexec: process_obit_event: evt 4 task 0 on wn502 stat 0.
mpiexec: process_obit_event: evt 5 task 1 on wn502 stat 0.
So it seems to me that these energy and force values are not reasonable.
2014-08-11 13:18 GMT+01:00 Justin Lemkul <jalemkul at vt.edu>:
>
>
> On 8/11/14, 8:17 AM, Dawid das wrote:
>
>> What do you mean by this question? Do you suggest to try reoptimization
>> starting from previous coordinates?
>>
>>
> You posted a SETTLE warning from step -1 during EM, but did not indicate
> if the EM proceeded and finished. That's what I'm asking. What happened
> next? Did EM finish? Did it yield a sensible energy and maximum force?
>
> -Justin
>
>
>
>> 2014-08-11 12:36 GMT+01:00 Justin Lemkul <jalemkul at vt.edu>:
>>
>>
>>>
>>> On 8/11/14, 5:40 AM, Dawid das wrote:
>>>
>>> I forgot to mention that I get similar error for steepest descent
>>>> minimization, not only conjugate gradient. Shall I change some options
>>>> in
>>>> *mdp files?
>>>>
>>>>
>>>> Does minimization proceed, i.e. the SETTLE problem is resolved? It's
>>> not
>>> uncommon to see such messages in the very early stages of EM. If they
>>> resolve and the energy and force values are sensible, there's no real
>>> problem.
>>>
>>> -Justin
>>>
>>>
>>>
>>> 2014-08-11 10:32 GMT+01:00 Dawid das <addiw7 at googlemail.com>:
>>>>
>>>> Dear Gromacs experts,
>>>>
>>>>>
>>>>> I have encountered quite annoying problem again. When I try either
>>>>> minimization or NVT dynamics of my solvated protein system I get
>>>>> message
>>>>> like this:
>>>>>
>>>>> step -1: Water molecule starting at atom 16281 can not be settled.
>>>>>
>>>>> It is for couple of water molecules. I have checked visually where
>>>>> these
>>>>> molecules are and for minimization they are near surface of protein
>>>>> (not
>>>>> buried inside). I attach the link for *gro, *top, *log and other files.
>>>>> What can I do about it?
>>>>>
>>>>> http://www.speedyshare.com/rN4gx/mCherry7-min.tar.bz2
>>>>> http://www.speedyshare.com/BnwU5/mCherry7-nvt-md.tar.bz2
>>>>> http://www.speedyshare.com/3k9jz/charmm27-files.tar.bz2
>>>>>
>>>>> Best wishes,
>>>>>
>>>>> Dawid Grabarek
>>>>>
>>>>>
>>>>> --
>>> ==================================================
>>>
>>> Justin A. Lemkul, Ph.D.
>>> Ruth L. Kirschstein NRSA Postdoctoral Fellow
>>>
>>> Department of Pharmaceutical Sciences
>>> School of Pharmacy
>>> Health Sciences Facility II, Room 601
>>> University of Maryland, Baltimore
>>> 20 Penn St.
>>> Baltimore, MD 21201
>>>
>>> jalemkul at outerbanks.umaryland.edu | (410) 706-7441
>>> http://mackerell.umaryland.edu/~jalemkul
>>>
>>> ==================================================
>>> --
>>> Gromacs Users mailing list
>>>
>>> * Please search the archive at http://www.gromacs.org/
>>> Support/Mailing_Lists/GMX-Users_List before posting!
>>>
>>> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>>>
>>> * For (un)subscribe requests visit
>>> https://maillist.sys.kth.se/mailman/listinfo/gromacs.org_gmx-users or
>>> send a mail to gmx-users-request at gromacs.org.
>>>
>>>
> --
> ==================================================
>
> Justin A. Lemkul, Ph.D.
> Ruth L. Kirschstein NRSA Postdoctoral Fellow
>
> Department of Pharmaceutical Sciences
> School of Pharmacy
> Health Sciences Facility II, Room 601
> University of Maryland, Baltimore
> 20 Penn St.
> Baltimore, MD 21201
>
> jalemkul at outerbanks.umaryland.edu | (410) 706-7441
> http://mackerell.umaryland.edu/~jalemkul
>
> ==================================================
> --
> Gromacs Users mailing list
>
> * Please search the archive at http://www.gromacs.org/
> Support/Mailing_Lists/GMX-Users_List before posting!
>
> * Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>
> * For (un)subscribe requests visit
> https://maillist.sys.kth.se/mailman/listinfo/gromacs.org_gmx-users or
> send a mail to gmx-users-request at gromacs.org.
>
More information about the gromacs.org_gmx-users
mailing list